Equipment
Filter dryers
-
Filters
-
Filter dryers
Vacuum dryers
Evaporators
Glass lined equipment
-
Glass lining
-
Standard DIN reactors
-
Standard ASME reactors
-
Tanks and receivers
-
Heat exchangers
- Columns
Glass equipment
Filter dryer – Filtrodry FEP/SD
Nutsche type pressure filters are extensively used to separate solids from liquids with the added benefit of removing impurities.
When drying is also required or the transfer of wet cakes to a dryer can impact product quality or when it is potentially hazardous to operating personnel, we provide filter dryers that combine pressure filtration and vacuum drying in one unit.
A filter dryer can process a concentrated slurry and discharge a dry powder.
All operations are conducted without exposing operators to the products and without contaminating the product itself, ensuring safety and quality at the same time.
We provide special solutions to keep the process fully contained also during the product’s filling and discharge phases.
Features and options
Show more Show lessThe Nutsche pressure filter dryer is recommended for pressure filtration, “re-slurry” washing, smoothing and displacement washing and vacuum drying & product discharge.
Rangeability
- Filtering surface up to 10 m2
- Design pressure: – 1 barg to + 6 barg
- Design temperature: – 25°C to + 200°C
Flat bottom
- Flanged to the cylindrical vessel, secured with:
- C-clamps
- Swing bolts
- Super clamp
- Hydraulic bayonet
- Welded to the cylindrical vessel
Filter media
- Monolayer:
- Synthetic cloth
- Metal mesh
- Sintered multilayer metal mesh
Top entry two arms agitator
Designed with special teeth to optimise cake smoothing and product discharge without mechanically damaging the product
Available with:
- Straight arms
- “S” shaped arms
Double mechanical seal
- Flushed
- Dry running
- Gas lift off
Top mounted dust filter
- Textile synthetic dust bags
- Metal multilayer cartridges
Side discharge port
Fixed flush to the filter screen and the vessel side wall
Available options:
- Manually opened hinged plug for discharge into the isolator
- Hydraulically operated O-ring type discharge hatch
- Hydraulically operated metal – metal straight type discharge hatch
- Hydraulically operated metal – metal “reverse” type discharge hatch
Cleaning-in-place (CIP) systems
The following options are used to wash the internal surfaces in contact with the product:
- Vessel CIP spray balls
- Mechanical seal recess spray ring
- Process connections spray nozzles
- Dust filter spray balls
- Dust filter spray nozzles
- Discharge hatch spray nozzles
- Discharge hatch seal spray nozzles
Welded waterproof insulation
Chemical, pharmaceutical and sterile versions
Material of contact (MOC) with the product
- 316L stainless steel
- Duplex stainless steels
- Alloy C 22
- Titanium
Other materials are available on request.
Accessories
Show more Show lessDischarge isolator (up to OEB6)
Pack-Off Isolator (up to OEB6)
Temperature control unit (TCU)
- Steam operated
- Electrically operated
Vacuum skid
- Dry running vacuum pump
- Oil lubricated vacuum pump
- Liquid ring vacuum pump
- Pre-condenser
- Post-condenser
- Condensate recovery tanks
- Condensate extraction pumps
Other accessories
- Inerting systems provided with oxygen analyser on request
- PLC automation systems
Applications
Show more Show lessTop performing for filtration and drying pharmaceutical products, such as APIs (active pharmaceutical ingredients) and HPAPIs (highly potent active pharmaceutical ingredients), they are extensively used also in other industries, such as:
- Biochemicals
- Crop protection
- Flavours & fragrances
- Food & beverage
- Pharmaceutical
- Polymers
- Precious and technology metals
- Waste recovery
Depending on the product and/or application, different construction materials are provided, including glass lined filter dryers to be used in aggressive acid conditions.
More about glass lined filter dryer – Filtrodry FEP/GL
Filter dryers can be provided as standalone units or modular turnkey systems to simultaneously satisfy functional needs and efficiency in project costs and execution time.
For new or innovative applications or to assess the correct sizing, even for consolidated processes, we provide support to customers with testing operations to study product behaviour, select filtration media, identify the ideal process parameters and support scale-up.